Non-Marking Acceptance
Three methods to compare
Marc Steele
Last Update 2 tahun yang lalu
Testing stations need to put some identification on the part after successful completion. The Mite-E-Mark is the perfect solution. But which stamp end to choose?
Period
The period is a simple mark that can be easily made on the verified part. The limited impression is small an unobtrusive. THis solution will not be distracting to the overall look of the part. Also, it will not damage the part, and can be found easily when looked for.
Part number for ordering CM7X13PP, CM8X25PP, or CM9X38PP depending on air impact marker being used
Conical Point
The depth is of conical punch is dependent on material hardness. The resulting mark is more obvious mark can be seen from distance.
Part number for ordering CM7XP90, CM8XP90, or CM9XP90 depending on air impact marker being used
Asterisk
The asterisk is best use for camera applications. The multifaceted mark catches light.
Part number for ordering CM7X13RR, CM8X25RR, or CM9X38RR depending on air impact marker being used.
The Acceptance mark tooling is available for all models of the CMT air impact marker line:
• Model 78 – CM7X
• Model 88,288 – CM8X
• Model 98,298, 451, 651,751, and 851 – CM9X